After installation, organized commissioning is required to confirm that the heat pump and the terminals operate as a single system.
Hydraulic check
Network pressure, venting, filters, valves, and proper circulation pump operation are checked.
Flow rates and ΔΤ
It is confirmed that each circuit receives the required flow and that the supply-return temperatures are reasonable.
Fan coils
The fan, valve, thermostat, noise, and condensate drainage are checked.
Underfloor heating
Manifolds, loop flow rates, actuators, and proper temperature distribution are checked.
Final settings
Setpoints, temperatures, and basic parameters are recorded to provide a reference point for future service.